Voici les réglages préconisés par Brion Sohn qui pratique sur tout ce qui ressemble de près ou de loin à un Direct Drive.
Pour les réglages in-game ils peuvent également servir pour les possesseurs de SimuCube... On voit qu'avec ce type de volant que ce soit Fanatec ou SimuCube, faut un peu bidouiller pour en tirer la quintessence...
Tuning Menu Settings:
Sensitivity (SEN) – Auto
Force Feedback (FF) – 100 (this is the Drive Force Feedback output)
Sock (SHO) – 100 (unneeded for me I don’t use the vibratory effects)
ABS (ABS) – OFF (unneeded for me I don’t use the vibratory effects)
Force Effect (FOR) – 100 (this controls the Game Sent Force Signal Amplitude)
Spring Effect (SPR) – 100 (not used by iRacing)
Damper Effect (DPR) – 100 (not used by iRacing)
Natural Damper (NDP) – 30 (this is the Drive Level Motor Damping)
Natural Friction (NFR) – 5 (this is the Drive Level Additive Friction)
Brake Force (BRF) – N/A used with brakes run through the Base User Preference
Force Effect Intensity (FEI) – 100 (this smooths spikes in the Force Feedback signal)
NOTE: I also like 90 but I am thinking an unavailable 95 -96 would be best
Multi Swith (MPS) – Controls the way the Rotary dials on certain wheels are used
In-Game Settings:
app.ini changes made
[Force Feedback] allowXBoxOneOnWindows10=1 ; Set to 1 to talk to xbox one game pads on windows 10, warning the driver is buggy alwaysRestartFX=0 ; Always restart force when updating it, set to true if wheel goes limp after a while calibUsingRawData=0 ; Use raw joystick position over windows calibration data when detecting new joysticks centerSpringPct=-1 ; Percent (0-100) of static centering spring force to apply, -1 is off. Not reccomended for use. damperMode=0 ; Set damper effect type 0 = Damper 1 = Inertia 2 = Friction damperSaturation=10000 ; Set damper saturation from 0 to 10000 dampingSliderSetsFriction=1 ; True if damping slider adjust friction effect, false to adjust wheels built in damping effect debounceSeq_Ms=80 ; Add delay in Milliseconds to sequential shifter to reduce double shifts disableAutoCenter=1 ; Turn auto center off on all force feedback devices displayLinearInNm=1 ; Display the force level in peak Nm when using the linear mode enableFanatecWheelDisplay=1 ; Enable the use of Fanatec wheel displays enableG27WheelDisplay=0 ; Enable use of shift indicators on the G27 and clones enableHotPlug=1 ; Set to 0 to turn off usb hot plugging in case you have usb disconnect issues enableWheelDisplayBlink=1 ; Enable the display lights to blink when at the rev limit FFBUseSimpleMinForce=0 ; 0 - Use smoothed min force, 1 - use old sharp min force forceNoiseSuppression=0 ; Remove noisy joystick axis, even if they are calibrated by hand forceResetBeforeInit=1 ; Force a reset of the whole FFB system every time we create or destroy a FFB effect initOnlyNewDevices=1 ; Set to 0 to force all devices to reinitialize when a device change is detected invertFFBForce=0 ; Reverse the force feedback effects, if your wheel is spinning the wrong way reinitFanatecWheelDisplay=0 ; reinitialize the fanatec wheel display when reconnecting devices this may cause issues seperateXBox360Triggers=1 ; Set to 1 to seperate the XBox 360 joystick triggers into there own axes steerAverageSteeringTorque=0 ; True averages 360 Hz data down to 60 Hz, false uses last sample steeringBumpStop_Deg=100.000000 ; degrees into bump stop before max force steeringDampingFactor=0.050000 ; Damping factor adjust down if damping becomes unstable, defautlt to 0.05 steeringDampingMaxPercent=0.000000 ; Maximum amount of damping to apply, adjust this to set damping level, values between 0.05 and 0.2 are best, overriden by damping slider steeringDampingParkedMaxPercent=0.000000 ; Maximum amount of damping to apply when parked, adjust this to reduce wheel oscilation when parked, values between 0.05 and 0.30 are best steeringFFBSmooth=1.000000 ; Percent of current FFB force to use vs average force, 1.0 = no average 0.001 = max average steeringForceParkedPct=0.500000 ; Reduce FFB force by percent when parked, to help reduce oscillations
Wheel Range and Map Range: Automatically determined by calibration wizard
Use Linear Mode: Checked
Reduce force when parked: Unchecked
Strength: 33Nm for DD1 (.579:1), 40Nm for DD2 (.655:1) *Specific output based on seen output numbers on OLED Display
Wheel force: 20Nm – Safty Feature in iRacing to keep from over driving high powered wheels, also alters the scale of the iRacing Strength slider to allow for easier adjustment. You don’t really need to set this if you don’t want to.
Damping 0% – Never Needed with Direct Drive
Min Force 0.0% – Never Needed with Direct Drive
https://boxthislap.org/fanatec-podium-iracing-configuration/